-
Total:
Measuring Modes | Multiple-Echo using 3 sound pulses to ignore coatings up to 20mm thick Echo-Echo using 2 sound pulses to ignore coatings up 1mm thick Single-Echo using 1 sound pulse |
Materials | Sound velocities between 1000 – 9000 m/s – covers virtually all common engineering materials |
Accuracy | ±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure |
Resolution | Multiple-Echo mode – 0.1 mm or 0.05 mm Single-Echo and Echo-Echo modes – 0.01 mm |
Measurement Range in Steel | Single Crystal Probes in Multiple-Echo:
Twin Crystal Probes in Single-Echo:
Twin Crystal Probes in Echo-Echo:
|
Connector | Twin Lemo 00 |
Power | 3 x AA batteries |
Battery Life | 10 hours minimum |
Electronics | Dual channel pulser |
Display | 2.4″ quarter VGA LCD and end-mounted LCD (rotatable) |
Size | 132 x 82 x 34 mm |
Weight | 300 grams (inc. batteries) |
Operating Temperature | -10°C to 50°C |
Data Logging | Capacity up to 5,000 points including A-scans |
Computer Software | CygLink allows remote logging and viewing of A-scan graphs. Survey and report generation to PDF file. Data can be exported as a .CSV file. Graphic analysis of data and statistical calculations. Designed for Windows 7 and Windows 8. |
Environmental Rating | IP67 (dust tight and immersion – 1 metre for 30 mins) Explosive Atmosphere: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL STD 810G Method 511.5, Procedure I MIL STD 810G Method 501.6 (high temp +55°C) MIL STD 810G Method 502.6 (low temp -20°C) MIL STD 810G Method 507.6 (humidity 95%) MIL STD 810G Method 512.6 (immersion – 1 metre for 30 mins) |
Shock and Impact | MIL STD 810G Method 514.7 (vibration – 1 hour each axis) MIL STD 810G Method 516.7 (shock 20g – 11ms half sine shock pulse, 40g 11ms in each axis) MIL STD 810G Method 516.7 (26 drops – transit drop 1.22 m) |
Standards | Designed for EN 15317 |
Environmental | RoHS, WEEE compliant |
Warranty | 3 years on gauge and 6 months on probe |
Stainless Steel INOX Single Crystal Probes
The INOX probes have an updated ergonomic design and an easier to read frequency, identification and serial numbering. All frequencies of INOX probes have a black face and a colour coding ring to identify probe frequency.
Used in Multiple-Echo mode, these probes require no zeroing, have a high linear accuracy, are ideal for general thickness gauging and on pipes and have replaceable wear membrane for long life.
Stainless Steel INOX Twin Crystal Probes
Used in Echo-Echo and Single-Echo modes and focussed ultrasound beam with improved measurability on extreme back wall corrosion and pitting.
Probe Options
For optimum performance of the ultrasonic thickness gauge it is essential to utilise the appropriate probe for the specific material being tested. Here below are the probe options available.
Single Crystal Probes: | 6 mm – 5 MHz (S5A) |
13 mm – 2.25 MHz (S2C (standard)), 3.5 MHz (S3C) or 5 MHz (S5C) | |
19 mm – 2.25 MHz (S2D) | |
Twin Crystal Probes: | 5 mm – 7.5 MHz (T7A) |
8 mm – 5 MHz (T5B (standard)) | |
12 mm – 2 MHz (T2C (for attenuative materials such as cast metals, plastics and composites)) |
Cygnus Cables
Measuring Modes | Multiple-Echo using 3 sound pulses to ignore coatings up to 20mm thick Echo-Echo using 2 sound pulses to ignore coatings up 1mm thick Single-Echo using 1 sound pulse |
Materials | Sound velocities between 1000 – 9000 m/s – covers virtually all common engineering materials |
Accuracy | ±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure |
Resolution | Multiple-Echo mode – 0.1 mm or 0.05 mm Single-Echo and Echo-Echo modes – 0.01 mm |
Measurement Range in Steel | Single Crystal Probes in Multiple-Echo:
Twin Crystal Probes in Single-Echo:
Twin Crystal Probes in Echo-Echo:
|
Connector | Twin Lemo 00 |
Power | 3 x AA batteries |
Battery Life | 10 hours minimum |
Electronics | Dual channel pulser |
Display | End-mounted LCD (rotatable) |
Size | 132 x 82 x 34 mm |
Weight | 300 grams (inc. batteries) |
Operating Temperature | -10°C to 50°C |
Environmental Rating | IP67 (dust tight and immersion – 1 metre for 30 mins) Explosive Atmosphere: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL STD 810G Method 511.5, Procedure I MIL STD 810G Method 501.6 (high temp +55°C) MIL STD 810G Method 502.6 (low temp -20°C) MIL STD 810G Method 507.6 (humidity 95%) MIL STD 810G Method 512.6 (immersion – 1 metre for 30 mins) |
Shock and Impact | MIL STD 810G Method 514.7 (vibration – 1 hour each axis) MIL STD 810G Method 516.7 (shock 20g – 11ms half sine shock pulse, 40g 11ms in each axis) MIL STD 810G Method 516.7 (26 drops – transit drop 1.22 m) |
Standards | Designed for EN 15317 |
Environmental | RoHS, WEEE compliant |
Warranty | 3 years on gauge and 6 months on probe |
Stainless Steel INOX Single Crystal Probes
The INOX probes have an updated ergonomic design and an easier to read frequency, identification and serial numbering. All frequencies of INOX probes have a black face and a colour coding ring to identify probe frequency.
Used in Multiple-Echo mode, these probes require no zeroing, have a high linear accuracy, are ideal for general thickness gauging and on pipes and have replaceable wear membrane for long life.
Stainless Steel INOX Twin Crystal Probes
Used in Echo-Echo and Single-Echo modes and focussed ultrasound beam with improved measurability on extreme back wall corrosion and pitting.
Probe Options
For optimum performance of the ultrasonic thickness gauge it is essential to utilise the appropriate probe for the specific material being tested. Here below are the probe options available.
Single Crystal Probes: | 6 mm – 5 MHz (S5A) |
13 mm – 2.25 MHz (S2C (standard)), 3.5 MHz (S3C) or 5 MHz (S5C) | |
19 mm – 2.25 MHz (S2D) | |
Twin Crystal Probes: | 5 mm – 7.5 MHz (T7A) |
8 mm – 5 MHz (T5B (standard)) | |
12 mm – 2 MHz (T2C (for attenuative materials such as cast metals, plastics and composites)) |
Cygnus Cables
Materials | Sound velocities between 1000 m/s – 9000 m/s – covers virtually all common engineering materials |
Accuracy | ±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure |
Resolution | 0.1 mm or 0.05 mm |
Measurement Range in Steel | 3 – 250 mm with 2.25 MHz probe (S2C/D) 2 – 150 mm with 3.5 MHz probe (S3C) 1 – 50 mm with 5.0 MHz probe (S5C/A) |
Connector | 1 x Lemo 1 |
Power | 3 x AA batteries |
Battery Life | 10 hours minimum,continuously measuring |
Electronics | Dual channel pulser |
Display | End-mounted LCD (rotatable) |
Size | 132 x 82 x 34 mm |
Weight | 300 grams (inc. batteries) |
Operating Temperature | -10°C to 50°C |
Environmental Rating | IP67 (dust tight and immersion – 1 metre for 30 mins) MIL STD 810G Method 501.6 (high temp +55°C) MIL STD 810G Method 502.6 (low temp -20°C) MIL STD 810G Method 507.6 (humidity 95%) MIL STD 810G Method 512.6 (immersion – 1 metre for 30 mins) |
Shock and Impact | MIL STD 810G Method 514.7 (vibration – 1 hour each axis) MIL STD 810G Method 516.7 (shock 20g – 11ms half sine shock pulse, 40g 11ms in each axis) MIL STD 810G Method 516.7 (26 drops – transit drop 1.22 m) |
Standards | Designed for EN 15317 |
Environmental | RoHS, WEEE compliant |
Warranty | 3 years on gauge and 6 months on probe |
Single Crystal Probes: | 6 mm – 5.0 MHz (S5A) |
13 mm – 2.25 MHz (S2C (standard)), 3.5 MHz (S3C) or 5.0 MHz (S5C) | |
19 mm – 2.25 MHz (S2D) |