Hydraulic Wrenches- Series TXU

[giaban]Contact[/giaban] [mota] [/mota] [masp] [/masp] [chitiet] 

Uni-Swivel Design The 360 ​​degree by 180 degree uni-swivel allows for shorter tool length, accommodating applications with obstructions.	Patented “Peanut-Shaped” Piston This feature allows the cylinder and ratchet link to be the same width. Friction reducing sliders prevent wear on the piston.
Hex Link Cassettes Each link is fitted with steel alignment pins connectingthe lower reaction area for added strength.	No Drip Quick Connect Couplers These 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensure safe operation.
Cylinder and Link Material Both cylinder and link are manufactured from 4340Aircraft Quality high strength steel alloy.	Nose Radius Tight nose radius allows this tool to fit in applicationswhere clearance constraints makeother tools are too bulky.
In-Line Reaction Pad This design ensures torsion-free reaction every time.	Link Pin One pin for link to cylinder engagement - no tool required for swapping ratchet links.
TXU Inline Reaction Arm This arm can be attached to the drive cylinder andratchet link to provide a reaction area further from the tool.	TXU Tool Handle This ergonomically designed handle for TorcUP hydraulic tooling can be attached to the tool for safeoperation and positioning of the tool, while keepinghands clear of any reaction points.
TXU Low Point Reaction Paddle The paddle allows for a reaction point below the tool or against the edge of the flange.	TXU Link Pin With Landyard The lanyard design for this accessory allows the link pin to be tethered to the tool, prevent lost or dropped pins when switching out ratchet links.
TXU Spanner Wrench The line of spanner wrenches for the TX Series, available in closed end standard sizes and open orclosed custom sizes, is a unique solution forapplications where traditional links will not fit.	TXU Hex Reducer Custom hex reducers are available for all TX models to reduce the hex openings on the links. Thesebustings can reduce 3/16” (5mm) or more, depending on need.

SPECIFICATIONS

DIMENSIONS

 [/chitiet]